Delta UniSaw 36-L31 - User Manual

INSTRUCTION MANUAL
UNISAW
®
10" Left Tilting Arbor Saw
(Models 36-L31, 36-L31X, 36-L51, 36-L51X
36-L51L, 36-L53L)
PART NO. 422-40-651-0017 - 06-13-05
Copyright © 2005 Delta Machinery
To learn more about DELTA MACHINERY
visit our website at: www.deltamachinery.com.
For Parts, Service, Warranty or other Assistance,
please call
1-800-223-7278 (In Canada call 1-800-463-3582).

Delta UniSaw 36-L31 Specifications

General

Type	Cabinet Saw
Blade Diameter	10 inches
Motor Power	3 HP
Table Size	20 in x 27 in
Weight	540 lb
Arbor Size	5/8 inches
Max. Depth of Cut at 90 Degrees	3-1/8 inches
Max. Depth of Cut at 45 Degrees	2-1/4 inches
No Load Speed	4300 RPM
Dust Port Size	4 inches
Amps	15 A

Summary

Safety Guidelines and Definitions

California Proposition 65 Warning

General Safety Rules

Additional Safety Rules for Table Saws

Power Connections and Grounding

Grounding Instructions

Explains proper grounding procedures to prevent electric shock.

Functional Description and Unpacking

Assembly and Tools Required

Blade Tilting Handwheel and Extension Wings

Starter Box and Switch Installation

Magnetic Starter Switch and Guard Assembly

Guard and Splitter Assembly

Splitter Installation and Alignment

Operational Controls and Adjustments

Starting and Stopping the Saw

How to safely start and stop the table saw.

Locking Switch in Off Position

Securing the switch to prevent unauthorized operation.

Overload Protection

Explanation of the motor overload protection feature.

Blade Raising Handwheel Operation

Procedure for adjusting the height of the saw blade.

Blade Tilting Handwheel Operation

How to tilt the saw blade to the desired angle.

Positive Stops and Table Adjustment

Adjusting 90 and 45 Degree Positive Stops

Adjusting Table Alignment

Table Insert and Miter Gage

Miter Gage Operation and Adjustment

Saw Blade and Belt Maintenance

Changing the Saw Blade

Procedure for safely replacing the saw blade.

Replacing Belts and Adjusting Belt Tension

Machine Use and Cross-Cutting

Cross-Cutting Operations

Guide to performing cross-cutting using the miter gage.

Unifence Cut-Off Gage and Ripping

Using the Unifence as a Cut-Off Gage

Ripping Operations

Ripping Techniques and Push Sticks

Ripping on Left Side of Saw Blade

Auxiliary Wood Facing and Troubleshooting

Troubleshooting Guide

Contact information for machine assistance and service.

Maintenance and Service

Keep Machine Clean and Lubrication

Failure to Start

Parts, Service or Warranty Assistance

Contact information for obtaining parts, service, or warranty support.