Chapter 7 Optional AccessoriesC2000 Plus
7-117
Frame B
Model “MKC-BFKM2” Heat Sink Fan
Applicable models
VFD075C23A-21; VFD110C23A-21; VFD110C43A-21; VFD150C43A-21; VFD110C4EA-21; VFD150C4EA-21
1. Refer to the figure below, press the tab on both side of
the fan to successfully remove the fan.
Figure 7-151
2. Disconnect the power terminal before removing the
fan. (As shown below.)
Figure 7-152
Frame B
Model ”MKC-BFKB” Capacitor Fan
Applicable models
VFD055C23A-21; VFD075C23A-21; VFD110C23A-21; VFD075C43A-21; VFD110C43A-21; VFD150C43A-21;
VFD075C4EA-21; VFD110C4EA-21; VFD150C4EA-21; VFD055C53A-21; VFD075C53A-21; VFD110C53A-21;
VFD150C53A-21
Disconnect fan power and pull out the fan by using a flat-head screwdriver. (As shown in the enlarged picture)
Figure 7-153
Disconnect fan power and pull out the
fan by a flat-head screwdriver
Pay attention to direction of the
latch during the installation
To Next Page
Loading...
Need help?
General