Chapter 7 Optional AccessoriesME300
7-56
Begin copying parameters until it is done.
Once copying parameters is done, the keypad
automatically returns to this screen.
Example: parameter saved in the keypad.
1.
Go to “Copy parameter”
2. Select the parameter group to copy and
press ENTER.
1. Select 2: VFD->keypad.
2. Press ENTER to go to the “VFD->keypad”
screen.
Use Up/ Down keys to select a symbol.
Use Left/ Right keys to move the cursor to
select a file name.
String & Symbol Table:
／．－，＋＊（）＇＆％＄＃＂！０１２３４５６７８９＠？＜＝＞；：
ＡＢＣＤＥＦＧＨＩＪＫＬＭＮＯＰＱＲＳＴＵＶＷＸＹＺ［＼］＾＿｀
ａｂｃｄｆｇｈｉｊｋｌｍｎｏｐｑｒｓｔｕｖｗｘｙｚ～｛｜｝
After you confirm the file name, press ENTER.
Begin copying parameters until it is done.
After copying parameters, the keypad
automatically returns to this screen.
Press Right key to see the date the
parameters were copied.
Press Right key to see the time the
parameters were copied.
6. Fault Record
Press to select.
KPC-CE01 does not support
this function.
Able to store 6 error codes (Keypad V1.02 and previous versions).
Able to store 30 error codes (Keypad V1.20 and later version).
The most recent error record shows as the first record. Select an error record to
see details such as date, time, frequency, current, voltage, and DC BUS voltage.
Press Up/ Down keys to select an error record.
Press ENTER to see that error record’s details.
To Next Page
Loading...