Delta VFD550C43A-00 - Page 1012

Chapter 14 Fault Codes and DescriptionsC2000 Plus
14-109
ID
Display on LCD Keypad
Fault Name
Fault Descriptions
182
Interpolation time
setting error (IPTE)
Used of IP mode, the interpolation time setting is
incorrect
Action and Reset
Action condition
The 60C2 object setting does not match the synchronize cycle
Action time
Act immediately
Fault treatment parameter
N/A
Reset method
Manual reset
Reset condition
Correct the 60C2 object setting to match the synchronize cycle
Record
Yes
Cause
Corrective Actions
60C2 setting value is incorrect
Correct 60C2 setting