Delta VFD550C43A-00 - Page 744

Chapter 12 Descriptions of Parameter SettingsC2000 Plus
12.1-11-61
Diagram 31
CiA402 object
0x6098H
Z Y X
Function Description
Homing
Method
Home
Limit
Z-phase
Signal
Setting
Homing
Mode
35 - - 8 Use the current position as the origin.
1. The current position is used as the origin (this function is available even when the drive is in stop
status).
A homing failure occurs when the following condition happen:
1. No homing failure condition occurs.