Denon 1083 - Adjusting the Audio Delay; Audio Delay Synchronization

61
Adjusting the Audio Delay
1
FUNCTION
(Main unit) (Remote control unit)
q Select the input source.
(Main unit) (Remote control unit)
w Set the input mode to “AUTO”.
2
e Select the Dolby/DTS Surround.
(Remote control unit)
1
1
1
1
1
2, 7
3, 5
4, 6
When watching a DVD or other video source, the picture on the monitor may seem delayed with respect to the sound. In this case, adjust the
audio delay to delay the sound and synchronize it with the picture.
The audio delay setting is stored separately for each input source.
r Play a program source (DVD, etc.).
Press the SYSTEM SETUP button and display the System
Setup Menu screen.
(Remote control unit)
3
Select “Audio Delay” on the System Setup Menu screen.
(Remote control unit)
4
Switch to the Audio Delay adjustment screen.
(Remote control unit)
5
Set the delay time. (0 ms ~ 200 ms)
(Remote control unit)
With a movie source, for example, adjust so that the
movement of the actors’ lips is synchronized with the sound.
6
Enter the setting.
The System Setup Menu reappears.
7
Press the SYSTEM SETUP button to complete the setting.
NOTE:
The audio delay setting does not apply when playing in the EXT. IN
mode or in the analog input direct mode or stereo mode (TONE
DEFEAT “ON”).
(Remote control unit)