To Next PageTo Next Page
Need help?Do you have a question about the Denon 1083 and is the answer not in the manual?
General| Frequency response | 20Hz to 20kHz |
|---|---|
| Total harmonic distortion | 0.05% |
| Input sensitivity | 2.5mV (MM), 150mV (line) |
| Dimensions | 434 x 137 x 353mm |
| Weight | 10.5kg |
| Power output | 80 watts per channel into 8Ω (stereo) |
| Speaker load impedance | 8Ω to 16Ω |
Covers fire, shock hazards, and general usage cautions.
Warnings regarding electrical interference and ventilation for optimal performance.
Guides for connecting CD players, turntables, and other audio devices.
Information on speaker impedance compatibility and precautions.
Explanation of the unit's protection circuit and its activation.
Detailed layout and function of the remote control unit's buttons.
Guide to initial system configuration and default settings.
Setting up speaker types, sizes, and positions for optimal sound.
In-depth guide to setting speaker parameters for optimal performance.
Pre-setting surround speakers for different sound modes like Cinema and Music.
Adjusting the frequency cutoff for bass output to the subwoofer.
Selecting playback modes for the subwoofer based on signal type.
Setting speaker delay times based on listening position for accurate sound imaging.
Adjusting playback levels for each speaker channel for balanced sound.
Fine-tuning speaker volume levels using test tones.
Mapping digital input sources to specific jacks like OPTICAL or COAXIAL.
Assigning component video inputs to specific sources for enhanced video quality.
Selecting the video signal priority (AUTO, S-Video, Video) for monitor output.
Synchronizing audio and video signals by delaying the sound.
Locking system setup settings to prevent accidental changes.
How to store manufacturer-specific remote control codes for various devices.
How to teach the remote control new signals from other remotes.
Procedures for resetting various functions of the unit.
Clearing stored preset codes for remote control devices.
Restoring all unit settings to their original factory defaults.
Checking all connections are correctly made before initial operation.
Instructions for powering the unit on and off, including standby mode.
Choosing which connected component's audio/video signal to play.
Setting how the unit processes different input signals like AUTO, PCM, DTS.
Using EXT. IN jacks for direct audio playback without surround processing.
High-fidelity playback mode that turns off video circuits for superior audio quality.
Utilizing test tones to balance speaker levels for optimal surround sound.
Fine-tuning individual speaker channel volumes for balanced playback.
Choosing between Dolby Digital and DTS surround modes for optimal playback.
A guide to diagnosing and resolving common issues with the receiver.
A comprehensive table listing all system setup items and their factory default settings.
