Denon 1083 - All Reset Function; Factory Reset Procedure

46
• This function is for resetting all the settings to the factory defaults.
DVD
2, 3
11
2, 3
1
Press the power ON/SOURCE button and the OFF button at
the same time. “PRE” appears on the remote control unit’s
display.
2
3
Use the • and ª cursor buttons to display “RST” on the
remote control unit, then press the ENTER button.
Use the • and ª cursor buttons to display “ALL” on the
remote control unit, then press the ENTER button.
• The LCD’s back light flashes during the resetting operation,
and when the operation is completed, “OK” is displayed
and the set returns to the normal operating mode.
(5) All reset function