Denon AVC-A1H User Manual

o
11.1-channel playback (MAIN ZONE) + 2-channel playback (ZONE2) + 2-channel playback (ZONE3)
This type of configuration plays back 11.1-channels in MAIN ZONE and 2-channels in ZONE2 and ZONE3.
ZONE2
L
ZONE2
R
ZONE3
L
ZONE3
R
MAIN ZONE
3ENOZ2ENOZ
C
SW
RSLS
FHL FHR
RHL RHR
SBL
SBR
FL FR
CFR FL SR SL
SBR SBL
FHR FHL RHR RHL
z
2
z
2
z
2
z
2
z
1
z
1
z
1
z
1
SW
ZONE2
R
ZONE2
L
ZONE3
R
ZONE3
L
z1
The speaker terminals for connecting to the ZONE2 speakers and ZONE3
speakers vary depending on the MAIN ZONE layout. Refer to “Amp Assign” -
“ZONE2” and “ZONE3”. (v p. 213)
z2
The height speakers, ceiling speakers and Dolby Atmos Enabled speakers
can be connected to the HEIGHT1 and HEIGHT2 speaker terminals. Set the
speaker to be connected from “Height” in the menu. (v p. 217)
Contents
Connections Playback Settings Tips Appendix
67
Front panel Display Rear panel Remote Index

Denon AVC-A1H Specifications

General

Channels	15.4
Power Output	150W per channel (8 ohms, 20Hz-20kHz, 0.05% 2ch Drive)
HDMI Outputs	3
Audio Formats	Dolby Atmos, DTS:X, Auro-3D, IMAX Enhanced
Wireless Connectivity	Wi-Fi, Bluetooth
Type	AV Amplifier
IMAX Enhanced	Yes
8K/60Hz Pass-through	Yes
4K/120Hz Pass-through	Yes
HDR Support	HDR10, HDR10+, Dolby Vision, HLG
eARC	Yes
Phono Input	Yes
THD	0.05%
Frequency Response	10 Hz - 100 kHz
Input Sensitivity	200 mV
Signal-to-Noise Ratio	102 dB
Ethernet	Yes
USB Port	Yes
Multi-Room Audio	HEOS
Amplifier Type	Class AB