Denon AVR-1602

Input the type of components connected to the digital input terminals
1
Use the _ (left) and _ (right) buttons to set the type of device connected to the COAXIAL input (COAXIAL)
terminal
(Initial)
9 C0i:::i:::: [::,U[::, ]
(left) button (right} button
• Select "OFF" if nothing is connected
SELE_._.___ Press the SELECT or I::]D (down} button to switch the optical input (OPT)setting
2
Use the GD (left) and _ (right} buttons to set the type of device connected to the OPTICAL input (OPTICAL)
terminal
(Initial)
i:L,?,,:::,Pi.... r,...,/ II''':::':_I1"..,::,'.'::::11,::::',:::''gI_
L J
(left) button (right) button
• Select "OFF" if nothing is connected
SEL_ % Press the SELECT or I_D (down} button if you want to start the settings over from the beginning.
NOTE:
• TUNER cannot be selected.
Press the SYSTEM button to finish system set up
This completes the system setup operations. Once the system is set up, there is no need to make the settings again unless other components
or speakers are connected to or the speaker layout is changed
2O