What to do if no sound from subwoofer on Denon Stereo Receiver?
If you're not getting any sound from your subwoofer, check these things: * Make sure the subwoofer is powered on. * In the 'Speaker Setup' menu, ensure the 'Subwoofer' setting is set to 'Yes'. * Verify that the subwoofer is properly connected. * Adjust the subwoofer's volume to an appropriate level.
Why no sound from surround speakers on Denon Stereo Receiver?
If you're not hearing sound from your surround speakers, the surround mode might be set to “STEREO” or “DIRECT”. Change the setting to a surround playback mode.
Why is there no sound from the surround back speaker on my Denon Stereo Receiver?
Several settings could be causing this. First, check if the surround back speaker’s power amplifier is assigned to the correct channel. Also, make sure the surround back speaker setting isn't set to “None”. Verify that the “Parameter” – “Surround Parameter” – “SB CH OUT” settings are not set to “OFF”. Finally, ensure that the surround mode is set to a mode for 6.1- or 7.1-channel playback. Check the setting and change it as necessary. Set to something other than “None”. Please set “Parameter” – “Surround Parameter” – “SB CH OUT” to settings other than “OFF”. Select a surround playback mode.
Why no sound from center speaker on Denon Stereo Receiver?
If you're not getting sound from the center speaker while playing a monaural source (like TV or AM radio) in “STANDARD” (Dolby/ DTS Surround) mode, change the mode to something other than “STANDARD” (Dolby/ DTS Surround).
What to do if no picture appears with HDMI connections on Denon Stereo Receiver?
If you're not getting a picture via HDMI, first, double-check all HDMI connections to ensure they are properly connected. Next, verify the HDMI input setting on your Denon Stereo Receiver. Finally, make sure the HDMI format settings on both your player and monitor are compatible.
Why does no picture appear on my Denon Stereo Receiver?
If you're not seeing a picture, it could be due to faulty connections between the Denon Stereo Receiver and your monitor. Also, the connection terminals on the Denon Stereo Receiver and the monitor might not be compatible. Check the connections and ensure that the monitor output terminal is the same type as the input terminal used.
Why won't test tones play when I press the TEST button on my Denon Stereo Receiver remote?
If no test tones are produced when pressing the TEST button, ensure that the surround mode is set to “STANDARD” (Dolby/ DTS Surround).
Why is the display off on my Denon Stereo Receiver?
If the display is off, the Dimmer setting is likely set to “OFF”. Change it to something other than “OFF”.
Why won't my iPod play on my Denon Stereo Receiver?
If your iPod isn't playing, confirm that the input source assigned to the control dock for iPod is selected. Also, check that the cable is properly connected and that the control dock for iPod’s AC adapter is plugged into a power outlet. Switch to the input source assigned at control dock for iPod. Reconnect. Plug the control dock for iPod’s AC adapter into a power outlet.
What does 'CHECK SR TUNER' mean on my Denon Stereo Receiver in SIRIUS mode?
If you see “CHECK SR TUNER” in SIRIUS mode, it means the Sirius Tuner unit isn't connected. Verify that the connections are correct.
General| Channels | 7.1 |
|---|---|
| HDMI Inputs | 3 |
| HDMI Outputs | 1 |
| Network Connectivity | No |
| Response Bandwidth | 10 Hz - 100 kHz |
| Signal-To-Noise Ratio | 100 dB |
| Total Harmonic Distortion | 0.08% |
| Input Sensitivity | 200 mV |
| Digital Optical Inputs | 2 |
| Digital Optical Output | 1 |
| Digital Coaxial Inputs | 2 |
| Audio Formats Supported | Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-HD Master Audio |
| Video Formats Supported | 1080p |
| Input Impedance | 47 kOhms |
| Dimensions (W x H x D) | 434 x 151 x 319 mm |
| Power Output | 75W (8 ohms, 20 Hz - 20 kHz, 0.08% THD, 2 channels driven) |
To Next Page
