Denon AVR-1712 - Settings Configuration; Basic Version Settings; Connecting AV Devices; Digital Camcorder Setup

13
(3) Remove the PCB SMPS/PCB SPK from the CHASSIS, then cut the wire clamp band.
6. PCB REG/PCB REG_CNT
(1) Disconnect the connector wires, then remove the screws.
PCB SMPS
PCB SPK
cut
Please refer to "EXPLODED VIEW" for the disassembly method of each P.W.B.
PCB SMPS/PCB SPK
→
PCB AUDIO_VIDEO ASSY
PCB REG/PCB REG_CNT
→
TOP COVER
PCB HDMI
→ →
Proceeding :
CP102
CP104