Denon AVR-2106 - LEVEL DIAGRAMS (1;2)

EVENT(or RESPONSE) and PARAMETER list
EVENT PARAMETER
function example *RES.
PW ON POWER ON/STANDBY change PWON<CR>
STANDBY PWSTANDBY<CR>
MV ** MASTER VOLUME change , **:00 to 99 by ASCII MV80<CR>
98 = +18dB(MAX)
80 = 0dB
00 = -80dB
99 = ---(MIN)
CV FL ** CHANNEL VOLUME change , **:00,32 to 62 by ASCII CVFL 50<CR>
FR ** 62 = +12dB(MAX) CVFR 50<CR>
C ** 50 = 0dB CVC 50<CR>
SW ** 38 = -12dB(MIN) CVSW 50<CR>
SL ** 00 = OFF (define ONLY SWch.) CVSL 50<CR>
SR ** CVSR 50<CR>
SBL ** (at SBch 2SP) CVSBL 50<CR>
SBR ** (at SBch 2SP) CVSBR 50<CR>
SB ** (at SBch 1SP) CVSB 50<CR>
MU ON OUTPUT MUTE ON/OFF change MUON<CR>
OFF MUOFF<CR>
SI PHONO INPUT source change SIPHONO<CR>
CD SICD<CR>
TUNER SITUNER<CR>
DVD ---Select DVD/VDP function at AVR-2106 SIDVD<CR>
VDP ---Invalid at AVR-2106 SIVDP<CR>
TV ---Select TV/DBS function at AVR 2106 SITV<CR>
DBS/SAT ---Invalid at AVR-2106 SIDBS/SAT<CR>
VCR-1 SIVCR-1<CR>
VCR-2 SIVCR-2<CR>
VCR-3 ---Invalid at AVR-2106 SIVCR-3<CR>
V.AUX SIV.AUX<CR>
CDR/TAPE1 ---Select CDR/TAPE function at AVR-2106 SICDR/TAPE1<CR>
MD/TAPE2 ---Invalid at AVR-2106 SIMD/TAPE2<CR>
*RES. : NOT returns '*' parameters as RESPONSE.
The PARAMETER of MV , CV COMMAND : "*" parameter uses two or three ASCII characters. (see page4 (J) section)
- -
247