Denon AVR-2106 - LEVEL DIAGRAMS (2;2)

EVENT PARAMETER
function example *RES.
ZM ON MAIN-ZONE ON/OFF change ZMON<CR>
OFF ZMOFF<CR>
Z1 PHONO ---Invalid at AVR-2106 Z1PHONO<CR>
| |
CDR/TAPE1 Z1MD/TAPE2<CR>
SOURCE ---Invalid at AVR-2106 Z1SOURCE<CR>
** ---Invalid at AVR-2106 Z180<CR>
ON ---Invalid at AVR-2106 Z1ON<CR>
OFF Z1OFF<CR>
Z2 PHONO MULTI ZONE-2 source change Z2PHONO<CR>
| ---The name of PARAMETER is |
CD/TAPE1 the same as that of the time of SI COMMAND. Z2MD/TAPE2<CR>
SOURCE MULTI ZONE-2 mode cancel Z2SOURCE<CR>
** MULTI ZONE-2 VOLUME change , **:10 to 99 by ASCII Z180<CR>
98 = +18dB(MAX)
80 = 0dB
10 = -70dB
99 = ---(MIN)
ON MULTI ZONE-2 ON/OFF change Z2ON<CR>
OFF Z2OFF<CR>
SR PHONO REC SELECT source change SRPHONO<CR>
| ---The name of PARAMETER is |
CDR/TAPE1 the same as that of the time of SI COMMAND. SRCDR/TAPE1<CR>
SOURCE REC SELECT mode cancel SRSOURCE<CR>
- -
248