Denon AVR-2113 User Manual

45
Listening to FM broadcasts
Cancelling preset skip
1
While the Preset Skip screen is displayed, use o p
to select a group containing a broadcast station to
cancel the skip for.
2
Use ui to select a broadcast station to cancel the
skip for.
GTV ScreenH
TUNE+/-
STEREO
AUTO
CH / OPTION
FM
CH 1 FM 87.50MHz
Now Playing
Tune Preset Option
Preset Skip
1 FM 87.50MHz On
Preset Group 1-8
2 FM 89.10MHz On
3 FM 98.10MHz On
4 FM 108.00MHz On
5 FM 90.10MHz On
6 FM 90.10MHz On
7 FM 90.10MHz On
8 FM 90.10MHz On
Set 1-8 to Skip
GDisplay of this unitH
1 87.50M:•On –
3
Use o p to select “On”.
The skip is cancelled.
NOTE
You cannot cancel the skip for each group.
n RDS search
RDS (works only on the FM band) is a broadcasting service which
allows a station to send additional information along with the
regular radio program signal.
Use this function to automatically tune to FM stations that provide
the RDS service.
NOTE
Note that the RDS function only works when receiving RDS compatible
stations.
1
Press FM to switch the input source to “FM”.
2
Press OPTION.
The option menu screen is displayed.
3
Use ui to select “RDS Search”, then press ENTER.
GTV ScreenH
TUNE+/-
STEREO
AUTO
CH / OPTION
FM
CH 1 FM 87.50MHz
Now Playing
Tune Preset Option
Direct Tune
Option
RDS Search
PTY Search
TP Search
Radio Text
Preset Memory
Tune Mode
Auto Preset Memory
GDisplay of this unitH
RDS Search
4
Press ENTER.
The search for RDS stations begins automatically.
GTV ScreenH
TUNE+/-
STEREO
AUTO
CH / OPTION
FM
CH 1 FM 87.50MHz
Now Playing
Tune Preset Option
RDS Search
CH 1 FM 87.50MHz
- PS NAME -
Search
GDisplay of this unitH
RDS SEARCH
•If no RDS stations are found with the above operation, all the
reception bands are searched.
•When a broadcast station is found, that station’s name appears on
the display.
•If no RDS station is found when all the frequencies have been
searched, “NO RDS” is displayed.
If you press o p within 5 seconds after the broadcast station name is
shown on the display, you can search for a different station.
Basic version
Advanced version
Informations
Basic version
DVD

Denon AVR-2113 Specifications

General

Receiver type	-
Frequency range	10 - 100000 Hz
Input sensitivity	200 mV
Audio output channels	7.1 channels
Audio A/D Converter (ADC)	24-bit/96kHz
Signal-to-Noise Ratio (SNR)	100 dB
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (1KHz@6 Ohm)	125 W
Power output per channel (20-20KHz@8 Ohm)	95 W
HDMI in	6
Audio (L/R) in	5
Composite video in	3
Component video (YPbPr/YCbCr) in	1
Headphone connectivity	6.3 mm
Speakers connectivity type	Clamp terminals
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Wi-Fi	No
Ethernet LAN	Yes
FM band range	87.5 - 108 MHz
Supported radio bands	FM
Preset stations quantity	56
Supported video modes	1080i, 1080p, 480p, 576p, 720p
Display	LCD
Product color	Black
Audio decoders	Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS, DTS 96/24, DTS Neo:6, DTS-HD
Volume control	Rotary
Multi-Zone quantity	2
Surround modes quantity	7
Apple docking compatibility	iPhone, iPod
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	500 W

Weight and Dimensions

Depth	332 mm
Width	435 mm
Height	167 mm
Weight	9500 g