Do you have a question about the Denon AVR-2809 and is the answer not in the manual?
Audio Channels | 7.1 |
---|---|
HDMI Inputs | 4 |
HDMI Outputs | 1 |
Dolby Atmos | No |
DTS:X | No |
Response Bandwidth | 10 Hz - 100 kHz |
Signal-To-Noise Ratio | 102 dB |
THD | 0.08% |
Input Impedance | 47 kΩ |
Input Sensitivity | 200 mV |
Tuner Bands | AM/FM |
Preset Station Qty | 40 |
USB Port | Yes |
Video Upconversion | Yes |
Network Connectivity | Yes |
Tuner Type | AM/FM |
Surround Sound Effects | Dolby Pro Logic IIx |
Audio D/A Converter | 24bit / 192kHz |
Connectivity | HDMI, Optical, Coaxial |
Dimensions (WxDxH) | 434 x 398 x 171 mm |
Inputs | 4 x HDMI, 2 x Optical, 2 x Coaxial |
Outputs | 1 x HDMI, 7 x Speaker |
Audio Decoders | Dolby Digital, DTS, Dolby Pro Logic IIx |
Frequency Response | 20 Hz - 20 kHz |
Essential warnings regarding electric shock, fire hazards, and protection from moisture.
Instructions for safe power disconnection and general usage advice for the unit.
List of accessories and important precautions for handling the unit.
Guidelines for installation and instructions for setting up the remote control unit.
How to access and operate the various settings through the unit's menu interface.
Selecting and configuring speaker setups and various surround sound playback modes.
Detailed adjustments for audio tone, Audyssey settings, and HDMI video/audio configurations.
Instructions for remote control operation and accessing system status information.
Information on remote range and identification of front panel controls and indicators.
Identification and layout of all input/output connectors on the rear panel of the AVR-2809.
Guide to selecting appropriate audio, video, and HDMI cables for connecting equipment.
Functionality of video conversion and guidance on typical speaker installation configurations.
Steps and considerations for connecting devices using HDMI cables, including compatibility.
Instructions for connecting record players and CD players, including turntable ground wire.
Instructions for connecting digital video and cassette recorders for signal recording.
Connecting amplifiers for ZONE2 and ZONE3 multi-zone audio output.
Instructions for connecting the power cord to the unit and AC outlet.
How to access and operate the various settings through the unit's menu interface.
A visual map of the menu hierarchy and how to navigate through setup options.
How to prepare and perform the automatic speaker setup process for optimal acoustics.
How to store auto setup results and review parameters, including error messages.
Manual settings for speaker configuration, subwoofer, surround speakers, and surround back speakers.
Settings for crossover frequency and HDMI video/audio output options.
Configuration options for audio playback, including EXT. IN subwoofer level, 2ch Direct/Stereo, and Dolby Digital setup.
Configuration for multi-zone audio playback and adjustment of bass and treble levels.
Settings for volume limit, power on level, mute level, and source level adjustments.
Options for deleting unused sources, setting remote ID, adjusting display, and locking setup settings.
Procedures for selecting input sources, assigning connectors, and managing input modes.
Adjusting audio source levels and assigning input sources to specific connectors (HDMI, Digital, Component, iPod).
Settings for iPod repeat mode, shuffle mode, and playback control.
Guide to selecting and understanding standard playback and surround modes for 2-channel sources.
How the AVR-2809 handles multi-channel sources like Dolby Digital and DTS for surround playback.
Selecting surround modes (Cinema, Music, Game) and applying Cinema EQ for movie soundtracks.
Selecting and configuring Audyssey settings like MultEQ XT, Dynamic EQ, and Dynamic Volume.
Using Dynamic EQ to optimize sound at low volumes and Dynamic Volume to manage volume variations.
Viewing current settings for the main zone, multi-zone status, and audio input signal details.
Steps for turning the unit on/off, adjusting master volume, and muting sound.
Instructions for playing music and videos from an iPod via the control dock.
Storing settings using Quick Select and the Personal Memory Plus function for instant recall.
Linking AVR-2809 operations with a TV via HDMI control for power and input switching.
How to select and operate DENON audio components using the main remote control unit.
How to preset the remote control to operate various brands of audio/video devices.
Controlling power for multiple zones and selecting input sources for each zone.
Assigning amplifiers for channels to enable multi-zone playback or bi-amp connections.
Guidelines and recommendations for installing surround back speakers and arranging speaker layouts.
Explanation of Dolby Digital, Dolby Digital Plus, Dolby TrueHD, and Dolby Pro Logic II/IIx formats.
Explanation of DTS Digital Surround, DTS-HD High Resolution Audio, DTS-HD Master Audio, and DTS-ES formats.
Details on Audyssey MultEQ XT, Dynamic EQ, and Dynamic Volume for audio optimization.
Table detailing channel outputs and parameter adjustability across different surround modes.
Common symptoms, causes, and countermeasures for general unit operation and sound output issues.
Troubleshooting issues related to video display, picture recording, and HDMI audio/video output.
Detailed technical data for audio power, input/output levels, frequency response, and video connectors.
Specifications for the main remote control unit (RC-1102), including batteries and dimensions.
List of preset codes for Denon amplifiers and iPod control docks.
Preset codes for cable set-top boxes, TV/VCR tuners, and video accessories.
Preset codes for various manufacturers starting with letters A through E.
Preset codes for various manufacturers starting with letters F through J.
Preset codes for various manufacturers starting with letters K through P.
Preset codes for various manufacturers starting with letters Q through S.
Preset codes for various manufacturers starting with letters T through V.
Preset codes for various manufacturers starting with letters W through Z.