Denon AVR-2809 User Manual


Getting Started Connections Setup Remote Control Multi-zone Information Troubleshooting
ENGLISH
Specifications
Other Operations and Functions
Other Operations
Playing Super Audio CD
1
Assign the HDMI input connector at the “HDMI”
setting (vpage 37).
2
Either turn <SOURCE SELECT> or press [SOURCE
SELECT] to select the input source assigned in step 1.
The “ ” indicator lights on the display.
3
Press INPUT MODE to select “AUTO” (vpage 36).
Select the input mode according to the program source to be
played.
4
Select the surround mode (vpage 38 ~ 40).
We recommend playing in the DIRECT mode.
5
Start playing the Super Audio CD.
The “ ” indicator lights on the display.
For operating instructions, refer to the respective equipment’s
operating instructions.
• When playing DSD signals in the DIRECT or PURE DIRECT mode,
the DSD signals are converted as such into analog signals. When
playing in other surround modes, the DSD signals are first converted
into PCM format, then into analog signals.
• “DSD DIRECT” is shown on the display when playing DSD 2-channel
signals in the DIRECT mode. “DSD MULTI DIRECT” is shown on
the display when playing DSD multi-channel signals in the DIRECT
mode.
Playback
NOTE
• Recordings you make are for your personal enjoyment and should
not be used for other purposes without permission of the copyright
holder.
• Input sources for which “Delete” is selected at “Source Delete”
cannot be selected.
• To cancel, press <ZONE2/3 / REC SELECT>, then turn <SOURCE
SELECT> until “ZONE2 Source” is displayed.
• Make a test recording before starting the actual recording.
• Signals are only output to the analog REC OUT connectors when
the digital signals input to the digital input connectors (OPTICAL/
COAXIAL) are PCM (2-channel) signals.
• Digital audio signals input to the HDMI connectors are not output
to the REC OUT connectors, so connect using the OPTICAL or
COAXIAL connectors.
• Sources selected with the REC OUT mode are output from ZONE2
as well.
• In the REC OUT mode, the remote control unit’s ZONE2 mode
buttons cannot be operated.
Recording on an External Equipment
(REC OUT mode)
You can listen to one program source while recording a different
program source.
1
Press <ZONE2/3 / REC SELECT>.
b The ZONE2 or ZONE3 selection mode changes each time you
press the button, and “ZONE2 Source” or “ZONE3 Source” is
displayed.
2
Turn <SOURCE SELECT> until “RECOUT Source” is
displayed.
The “ ” indicator lights.
n During ZONE2 / Rec Select
ZONE2 Source ZONE2 TUNER ZONE2 V.AUX····
RECOUT V.AUX RECOUT TUNER RECOUT Source······
3
Turn <SOURCE SELECT> to choose the input source
to be recorded.
4
Play the program source.
For operating instructions, refer to the respective equipment’s
operating instructions.
To record FM or AM broadcasts, select the broadcast (vpage
49).
5
Start recording.
For operating instructions, refer to the respective equipment’s
operating instructions.

Denon AVR-2809 Specifications

General

Brand	Denon
Model	AVR-2809
Category	Receiver
Language	English