Denon AVR-2809 User Manual


Getting Started Connections Setup Remote Control Multi-zone Information Troubleshooting
ENGLISH
Specifications
1
Either turn <SOURCE SELECT> or press [TUNER]
(AMP mode) to select “TUNER”.
2
When using the main remote control unit to operate,
press [NET/TU] to select mode.
(vpage 56 “Remote Control Unit Operations”)
3
Press [BAND] to select “FM” or “AM”.
4
Tune in the desired broadcast station.
q To tune in automatically (Auto Tuning)
Press [MODE] to light the “AUTO” indicator on the display, then
use [ ] to select the station you want to hear.
w To tune in manually (Manual Tuning)
Press [MODE] to turn off the display’s “AUTO” indicator, then use
[ ] to select the station you want to hear.
Listening to FM/AM Broadcasts
Basic Operation
Playing Video and Audio
Equipment
1
Prepare the equipment.
q Load the BD, DVD, CD or other software in the player.
(vSee the operating instructions of the respective equipment.)
w To play a video equipment, switch the monitor input.
(vSee the monitor’s operating instructions.)
2
Use SOURCE SELECT to select the input source.
3
Start playback.
(vSee the operating instructions of the respective equipment.)
Basic Operation
• If the desired station cannot be tuned in with auto tuning, tune it in
manually.
• When tuning in stations manually, press and hold [ ] to
change frequencies continuously.
• The time (default : 30 sec) for which the on-screen display are
displayed can be set at “Manual Setup” – “Option Setup” – “On-
Screen Display” (vpage 32).
Press uio p to return to the original screen.
The main remote control unit can be used to operate external devices.
See “Remote Control Unit Operations” (vpage 56).
Presetting Radio Stations
(Preset Memory)
Your favorite broadcast stations can be preset so that you can
tune them in easily. Up to 56 stations can be preset.
1
Tune in the broadcast station you want to preset.
2
Press [MEMO].
3
Press [A ~ G] to select the block in which the station is
to be preset.
4
Press [CHANNEL + –] or [NUMBER (1 ~ 8)] to select
the preset number.
5
Press [MEMO] again to complete the setting.
• To preset other stations, repeat steps 1 to 5.
• Stations can be preset automatically at menu “Input Setup” – “Auto
Preset” (vpage 34).
NOTE
Preset stations are erased by overwriting them.
n Default settings
Auto tuner presets
A1 ~ A8
87.5 / 89.1 / 98.1 / 108.0 / 90.1 / 90.1 / 90.1 /
90.1 MHz
B1 ~ B8
522 / 603 / 999 / 1404 / 1611 kHz,
90.1 / 90.1 / 90.1 MHz
C1 ~ C8
90.1 MHz
D1 ~ D8
90.1 MHz
E1 ~ E8
90.1 MHz
F1 ~ F8
90.1 MHz
G1 ~ G8
90.1 MHz
Listening to Preset Stations
Press <TUNING PRESET>, then turn <SOURCE SELECT>
to select the preset radio station.
Operation on the Main Unit
Operation on the Main Remote Control Unit
1
Press [A ~ G] to select the memory block.
2
Press [CHANNEL + –] or [NUMBER (1 ~ 8)] to select
the desired preset channel.
1
Press [SEARCH].
2
Input frequencies by means of [NUMBER (0 ~ 9)].
b If [o] is pressed, the immediately preceding input is
cancelled.
3
When setting is completed, press [ENTER].
The preset frequency is tuned in.
Direct Frequency Tuning
You can enter the receiving frequency directly to tune in.
Playback

Denon AVR-2809 Specifications

General

Brand	Denon
Model	AVR-2809
Category	Receiver
Language	English