Speaker Setup
Use this procedure to set the speakers manually or if you wish to
change the settings made with the auto setup procedure.
a
Speaker Confi guration
Select speaker confi guration and size.
(bass reproduction capability)
Front Speaker
Select front speaker size.
[Selectable items]
Large
Small
Subwoofer
Select subwoofer use.
[Selectable items]
Yes
No
Center Speaker
Select center speaker use and size.
[Selectable items]
Large
Small
None
For details on how to select, set and cancel settings for each menu, see “Menu Operations” (vpage 19).
Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting
ENGLISH
Even when the surround back speaker setting is other than
“None”, sound may not be emitted from the surround back
speaker, depending on the playback source. In this case, make
a menu “Parameter” – “Surround Parameter” – “SB CH Out”
setting other than “OFF” (vpage 42).
Large
: Select this when using large speakers with ample low
frequency reproduction capabilities.
Small
: Select this when using small speakers without ample low
frequency reproduction capabilities.
None
: Select this when no speaker is connected.
Yes
: Select this when a subwoofer is connected.
No
: Select this when no subwoofer is connected.
2spkrs
1spkr
:
Select the number of surround back speakers.
Surround Back Speaker
Select surround back speaker use and size.
[Selectable items]
Large
Small
None
2spkrs
1spkr
Surround Speaker
Select surround speakers use and size.
[Selectable items]
Large
Small
None
Specifi cations
Button located on both the main unit
and the remote control unit
BUTTON
Button only on the main unit
<BUTTON>
Button only on the remote control unit
[BUTTON]
Symbols used to indicate buttons in this manual
To Next Page
Loading...
Need help?
General
