EasyManuals Logo

Denon AVR-2313CI User Manual

Denon AVR-2313CI
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #133 background imageLoading...
Page #133 background image
130
Quick Select Names
Change the “Quick Select” display title to one you prefer.
Setting details
Quick Select 1 / Quick Select 2 / Quick Select 3 / Quick Select 4
•Up to 16 characters can be input.
•For character input, see page101.
Trigger Out
Selects when to activate trigger out.
For details about how to connect the TRIGGER OUT jack, see “TRIGGER OUT jack” (vpage22).
Setting details
n When setting for zone (MAIN ZONE / ZONE2)
Trigger out is activated through linkage to the power of the zone set to “On”.
n When setting for input source
Activate trigger out when the input source set to “On” is selected.
Active for the zone set to “On” with “When setting for zone”.
n When setting for HDMI monitor
Activate trigger out when the HDMI monitor set to “On” is selected.
Activate trigger out when the HDMI monitor set to “On” is selected. Active when the “MAIN
ZONE” set to “On” with “When setting for zone” is selected, and when the input source set to
“On” with “When setting for input source” is selected.
•On : Activate trigger on this mode.
•– – – : Do not activate trigger on this mode.
Auto Standby
Default settings are underlined.
When you do not perform any operation on this unit with no audio or video input for a specified time,
this unit automatically enters the standby mode. Before it enters the standby mode, “Auto Standby” is
displayed on the display of this unit and the menu screen.
Setting details
30min : The unit goes into standby after 30 minutes.
60min : The unit goes into standby after 60 minutes.
Off : The unit does not go into standby automatically.
Front Display
Default settings are underlined.
Adjust the display brightness of this unit.
Setting items Setting details
Dimmer
Bright : Normal display brightness.
Dim : Reduced display brightness.
Dark : Very low display brightness.
Off : Turns the display off.
Buttons on the main unit can be used for operations.
Each time DIMMER is pressed, the setting is changed as shown
below.
Bright Dim
DarkOff
NOTE
When “Dimmer” is set to “Off”, the display turns off and appears as if
there is no electricity.
General
Basic version
Advanced version
Informations
Advanced version
DVD

Table of Contents

Other manuals for Denon AVR-2313CI

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-2313CI and is the answer not in the manual?

Denon AVR-2313CI Specifications

General IconGeneral
Receiver type-
Audio output channels7.1 channels
Power output per channel (1KHz@6 Ohm)135 W
Power output per channel (20-20KHz@8 Ohm)105 W
HDMI in8
Audio (L/R) in6
Composite video in4
Ethernet LAN (RJ-45) ports1
Component video (YPbPr/YCbCr) in2
12V triggerYes
FM band range87.5 - 107.9 MHz
Supported radio bandsFM
Internet radio services supportedPandora, SIRIUS Internet Radio, Spotify, vTuner
Card reader integratedNo
Product colorBlack
Audio decodersDolby Digital Plus, Dolby Pro Logic IIz, Dolby TrueHD, DTS 96/24, DTS Digital Surround, DTS Neo:6, DTS-ES (Discrete 6.1), DTS-HD, DTS-HD Master Audio
Volume controlRotary
Weight and Dimensions IconWeight and Dimensions
Depth378.9 mm
Width434.3 mm
Height166.8 mm
Weight10899 g

Related product manuals