Denon AVR-2313CI

80
FL FR
C
SL
SR
SW
FHRFHL
Connecting 7.1-channel speakers using front height speakers
The illustration on the right shows a connection example for performing 7.1-channel playback using the
front height speakers.
To perform 7.1-channel playback using the front height speaker, set “Assign Mode” to “Front Height” in
steps 3 to 5 for “Set up “Amp Assign”” (vpage87).
Cables used for connections
Audio cable (sold separately)
Speaker
cable
Subwoofer
cable
When using Dolby Pro Logic gz or Audyssey DSX
®
, install front height speakers.
NOTE
•For speaker cable connections, see page78.
•For speaker impedance , see page78.
Speaker connection
Basic version
Advanced version
Informations
Advanced version
DVD