Denon AVR-2805

[] OPERATION
Refer te "CONNECTIONS" (pages 6 to 13) and check that all
connections are correct.
2
Select "AMP" using the AMP button.
(onlv when operating with the remote centrel unit)
(Remote control unit}
Press the POWER switch (butten).
_ONIOF_
%
(Main unit)
• .,,,,.ON
The power turns on and indicator is light.
Set the power switch te this position to turn the pewer on
and off frem the included remote control unit.
• l. OFF
The power turns off and indicator is eff.
In this position, the power cannot be turned en and off
frem the remete control unit,
Turn en the power
Press the POWER ON/STANDBY switch (butten).
ON ! STANDBY
ONI SOURCE
(Remote control unit) (Main unit)
When pressed, the pewer turns en and the display lights. The sound
is muted fer several secends, after which the unit operates nermally.
When pressed again, the pewer turns off, the standby mede is set
and the display turns eff.
The frent speakers switch as shown below each time the
FRONT SPEAKER butten is pressed.
FRONT
FRONT SPEAKER
% %
(Remote control unit) (Main unit)
4 3
O©©©©_ 000_
®®
5
58