Denon AVR-3200

Clearing “learned” remote control signals and the preset
memory
settings
1
Press the
USE/LEARN
selector
button
with the tip ofa pen, etc.,
to set
the learn mode.
ix
11E1ON
EA825
cZ
D!S5+
5
2
To clear “learned” remote control signals,
set the slide
switch
to the position at
which
the signals were “learned” . To clear the
preset memory
settings,
set the slide switch
to
“VIDEO”.
AUDIO
AVR/AVC
VIDEO
3
Set
the slide switch to the position
at
which
the
signals were
“learned” or
at
which the
preset
memory
settings
were
set.
CD DECK
DAT
VDPVCR
TV
4
Press the
SYSTEM CALL SET
button, and
hold it
in
for
at
least
four seconds.
5
When both
the START and
LEARNED
/
TX LEDs light simulta
neously, all the stored codes
are cleared.
-4,,
Lit
c% .
Press the
USE/LEARN
selector
button.
23