EasyManuals Logo

Denon AVR-3300 Brochure

Denon AVR-3300
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Denon AVR-3300 Dolby Digital & dts A/V Receiver
Overview
Denon’s flagship A/V receiver, the AVR-5700, set the standard for home theater and music
reproduction accuracy, with a host of technological advances and user features that define the
present state-of-the-art in a single A/V component.
Denon’s AVR-3300 A/V receiver has been specifically designed to incorporate as many of the
AVR-5700’s technologies and features at a dramatically lower retail price.
AVR-3300 Technical Details
Front End
Inputs (analog) are provided for the following audio sources:
AM/FM tuner (built-in); moving magnet phono; CD; MD/Tape
Inputs are provided for the following video sources:
• DVD; VDP; TV/DBS (TV input, or satellite tuner); VCR 1; VCR 2/V AUX
Analog inputs are converted to digital via precision 20 bit oversampling A/D converters for deliv-
ery to the DSP section. An analog 2 channel bypass routes stereo analog audio past the DSP
section, providing straight-through signal purity. A parallel bass management circuit provides
high pass/low pass filtering for the main left and right speakers and the subwoofer, so that the
analog signals appearing at the left and right speaker jacks remain in analog form from the AVR-
3300’s input jacks all the way through to the outputs, when the ANALOG button is selected on
the remote control (for stereo music listening without surround simulation enhancement). This
feature is especially important if your CD player has HDCD decoding, as a digital connection
does not provide the benefits of HDCD processing. The AVR-3300’s analog bypass mode pre-
serves the full fidelity of your favorite HDCDs, LP recordings and other high quality sources.
Competitive A/V receivers typically “digitize” all incoming analog signals, even during simple
stereo operation. Not so with the AVR-3300 (or other Denon digital A/V components).
A record output function allows the user to select an audio source for direct delivery to the
recording output jacks, while the user listens/watches another source.
A separate Multi-zone output selector delivers a fixed or variable level output to the multi-room
output jacks (one stereo pair) for second zone music listening.
Cinema Equalizer tames overly bright movie soundtracks by gently tailoring (not filtering) the
very top octaves of the three front channels.
Eight Channel External Inputs are provided for future 7.1 channel discrete surround formats.
Newly proposed multi-channel music formats such as Super Audio CD and DVD-Audio may
have up to eight discrete channels – the AVR-3300 is prepared for the future of multi-channel
music reproduction.

Other manuals for Denon AVR-3300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-3300 and is the answer not in the manual?

Denon AVR-3300 Specifications

Audio Specifications IconAudio Specifications
rated output (front)105 W + 105 W (8 Ω, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
rated output (center)105 W (8 Ω, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
dynamic power140 W x 2 ch (8 Ω)
input sensitivity / input impedance200 mV / 47 kΩ
frequency response (analog)10 Hz ~ 50 kHz: +0, –3 dB (DIRECT mode)
S/N (analog)102 dB (DIRECT mode)
distortion (analog)0.01% (20 Hz ~ 20 kHz) (DIRECT mode)
D/A output (rated)2 V (at 0 dB playback)
total harmonic distortion (digital)0.008% (1 kHz, at 0 dB)
S/N ratio (digital)102 dB
dynamic range (digital)96 dB
phono input sensitivity2.5 mV
RIAA deviation±1 dB (20 Hz to 20 kHz)
signal-to-noise ratio (phono)74 dB (A weighting, with 5 mV input)
distortion factor (phono)0.03% (1 kHz, 3 V)
Video Specifications IconVideo Specifications
input / output level and impedance (standard video)1 Vp-p, 75 Ω
frequency response (standard video)5 Hz ~ 10 MHz — +0, –3 dB
input / output level and impedance (S-video)Y signal — 1 Vp-p, 75 Ω; C signal — 0.286 Vp-p, 75 Ω
frequency response (S-video)5 Hz ~ 10 MHz — +0, –3 dB
input / output level and impedance (color component video)Y signal — 1 Vp-p, 75 Ω; Cb/Cr signal — 0.7 Vp-p, 75 Ω
frequency response (color component video)5 Hz ~ 20 MHz — +0, –3 dB
Tuner Specifications IconTuner Specifications
receiving range (FM)87.50 MHz ~ 107.90 MHz
receiving range (AM)520 kHz ~ 1710 kHz
usable sensitivity (FM)1.0 µV (11.2 dBf)
50 dB quieting sensitivity (MONO)1.6 µV (15.3 dBf)
S/N (IHF-A) (MONO)80 dB
total harmonic distortion (MONO)0.15% (at 1 kHz)
General Specifications IconGeneral Specifications
power supply (North America model)AC 120 V, 60 Hz
power consumption (North America model)5.6 A
maximum external dimensions434 (W) x 171 (H) x 416 (D) mm
weight15.0 kg (33 lbs 2 oz)
batteries (remote control)R6P/AA Type (two batteries)
external dimensions (remote control)70 (W) x 215 (H) x 24 (D) mm
weight (remote control)200 g (Approx. 7 oz) (including batteries)

Related product manuals