Getting Started Connections Playback Remote ControlMulti-zone Information Troubleshooting Specifications
Setting items Setting contents
Front Speaker Setup
Set the front speakers to use
for every surround mode.
Setting : Choose the method for setting the front speakers.
Normal : The front speakers are set using the <FRONT SPEAKERS>.
Custom : The front speakers used for the different playing modes are
set in advance.
2CH DIRECT/STEREO : The front speakers used in the direct, stereo and
pure direct play modes (2 channel) are set in advance.
A : Front speaker A is used.
B : Front speaker B is used.
A+B : Both front speakers A and B are used.
MULTI CH : The front speakers used in modes other than the direct, ste-
reo and pure direct play modes (2 channel) are set in advance.
A : Front speaker A is used.
B : Front speaker B is used.
A+B : Both front speakers A and B are used.
NOTE
• When set to “Custom”, <FRONT SPEAKERS> does not operate.
• The front speaker setting stored for the “Quick Select” function is given
priority.
•
•
•
•
•
•
•
•
Making Detailed Settings (Manual Setup)
Setting
Setting items Setting contents
HDMI Control
External devices can be con-
trolled from the AVR-3310CI
and the AVR-3310CI can be
controlled from external de-
vices.
NOTE
The HDMI control function
controls operations of a
TV that is compatible with
the HDMI control function.
Make sure that the TV and
HDMI are connected when
you perform HDMI control.
ON : Use the HDMI control function.
OFF : Do not use the HDMI control function.
Please consult the operating instructions for each connected device to
check the settings.
For details on the HDMI control function, see “HDMI Control Function”
(vpage 78).
NOTE
• When “HDMI Control” is set to “ON”, it consumes more standby
power.
• When not using this unit for a long period, we recommend that you
press <POWER> to turn off (jOFF) the power.
• When the “HDMI Control” setting has been changed, always turn off
the power to the connecting devices afterwards and then turn back on.
• The “HDMI Control” does not work when the power to the equipment
is off.
• When “HDMI Control” is set to “ON”, power is supplied constantly to
the AC outlet (UNSWITCHED).
•
•
Standby Source
Set the HDMI connector for
HDMI signal input during
standby.
Last : Standby with last used input source during power on.
HDMI1 / HDMI2 / HDMI3 / HDMI4 / HDMI5 : The standby mode is set at
the input source assigned to the respective.
This can be set when “HDMI Control” is set to “ON”.
Power Off Control
The power of the AVR-
3310CI and external device
turn off together.
ON : Switched.
OFF : Not switched.
This can be set when “HDMI Control” is set to “ON”.
Please consult the operating instructions for each connected device to
check the settings.
For details on the HDMI control function, see “HDMI Control Function”
(vpage 78).
•
•
•
Setting items Setting contents
RGB Range
Set the video range of RGB
output from the HDMI
terminal.
Normal : Output with RGB video range (16 (black) to 235 (white)).
Enhanced : Output with RGB video range (0 (black) to 255 (white)).
This setting is valid when using a TV equipped with a DVI terminal.
Auto Lip Sync
Automatic compensation
for timing shift in audio and
video output.
ON : Compensated.
OFF : Not compensated.
Audio Out
Select HDMI audio output
device.
AMP : Playback through speakers connected to the receiver.
TV : Playback through TV connected to the receiver.
When the HDMI control function is operating, the setting of audio
playback in the connected TV takes priority (vpage 78 “HDMI
Control Function”).
Make settings for HDMI video/audio output.
Making the HDMI Settings (HDMI Setup)
Default settings are underlined.
Main remote control
operation buttons
:Displaying the menu
Cancel the menu
:Moves the cursor
(Up/Down/Left/Right)
:Confirm the setting :Return to previous menu
To Next Page
Loading...
Need help?
General
