Denon AVR-3310CI User Manual (English)

Other manuals for Denon AVR-3310CI

Owner's Manual112 pages

Before Upgrading Guide1 page

Getting Started2 pages

Questions and Answers:

A
Amber AlexanderAug 18, 2025
How to fix no sound from speakers on Denon AVR-3310CI?
- R
  robert24Aug 18, 2025
  If no sound is coming from the speakers connected to your Denon Stereo Receiver, check the following: * Verify the connections to the input devices and speaker cables. * Ensure the correct input source is selected for your playback devices. * Adjust the master volume to a suitable level. * Deactivate mute mode. * Disconnect any connected headphones. * Select an input source with a digital input setting. * Ensure the digital input terminal matches the input mode.
C
Christina ThomasAug 20, 2025
How to output HDMI audio signals from speakers on Denon AVR-3310CI?
- J
  Jeremy AriasAug 21, 2025
  If HDMI audio signals are not output from the speakers of your Denon Stereo Receiver, set “Audio Out” to “AMP” to enable HDMI audio output from the speakers.
C
Corey HendersonAug 23, 2025
Why does my Denon Stereo Receiver AVR-3310CI power off suddenly and flash red?
- D
  derekmendozaAug 23, 2025
  If the Denon Stereo Receiver's power switches off suddenly and the power indicator flashes red at 0.5-second intervals, it could be due to using speakers with unspecified impedance. Also, check for any loose speaker wires touching each other or the receiver's rear panel. If wires are touching, unplug the power cord, twist the core wires together tightly, and reconnect them.
C
Charles ElliottAug 26, 2025
Why does my Denon AVR-3310CI Stereo Receiver not respond to the remote control?
- D
  Danielle KennedyAug 26, 2025
  If your Denon Stereo Receiver does not work properly when using the remote control, try these steps: * Replace the batteries with new ones. * Ensure you are within 7 meters and 30 degrees of the receiver. * Remove any obstacles between the remote and the receiver. * Check the battery polarity (+/-) when inserting them. * Move the unit away from strong light sources. * Ensure the remote control IDs match. * Set the remote control unit’s function button properly.
H
humphreyhollyAug 27, 2025
How to troubleshoot no picture on Denon AVR-3310CI?
- C
  Christopher GarciaAug 28, 2025
  If no picture appears when using your Denon Stereo Receiver, verify the connections between the receiver's video output terminals and the TV's input terminals. Ensure the TV input setting matches the input from the receiver. Cancel PURE DIRECT mode. If using high definition or progressive video signals, set the player to interlace signals. Check the “Video Select” setting.
S
Sarah MckenzieAug 30, 2025
What to check if my Denon AVR-3310CI doesn't turn on?
- K
  Kevin KlineAug 30, 2025
  If your Denon Stereo Receiver's power does not turn on, or turns off immediately after being turned on, check that the power plugs are securely inserted into the receiver's AC inlet and the wall power outlet.
L
Linda DavisSep 1, 2025
Why is there no picture with HDMI connection on my Denon AVR-3310CI Stereo Receiver?
- W
  wrightkristenSep 1, 2025
  If no picture appears with HDMI connections on your Denon Stereo Receiver, verify the HDMI connector connections. Ensure the input source assigned to the HDMI terminal is selected at “HDMI”. Connect a monitor that supports copyright protection (HDCP). Check that the output format of the connected player matches the TV's compatible input formats.
T
Tony MacdonaldSep 3, 2025
How do I fix the GUI not displayed on my Denon AVR-3310CI?
- J
  Jacob CarterSep 3, 2025
  If the GUI is not displayed on your Denon Stereo Receiver, set “Format” according to the format (NTSC or PAL) of the TV being used.
T
Tyler SparksSep 6, 2025
What to do if my Denon Stereo Receiver set does not operate properly?
- D
  Donald MilesSep 6, 2025
  If your Denon Stereo Receiver is not operating properly, try resetting the microprocessor.
K
Katherine GrahamSep 8, 2025
Why is the display off on my Denon Stereo Receiver?
- T
  tiffany57Sep 8, 2025
  If the display is off on your Denon Stereo Receiver, set the dimmer function to a setting other than “OFF”. Also, cancel the PURE DIRECT mode, as the display turns off in this mode.

Denon AVR-3310CI Specifications

General

Channels	7.1
Power Output (8 ohms)	125 W
Total Harmonic Distortion (THD)	0.05%
Frequency Response	10 Hz - 100 kHz
Input Sensitivity	200 mV
Signal-to-Noise Ratio	102 dB
HDMI Inputs	6
HDMI Outputs	2
Weight	28.7 lbs (13 kg)
THD	0.05%
Input Impedance	47 kΩ
Tuner Bands	AM/FM
Surround System Class	Dolby TrueHD, DTS-HD Master Audio
HDMI Switching	Yes
Speaker Impedance	4 - 16 ohms
Audio Inputs	8
Audio Outputs	2
Video Inputs	6
Video Outputs	2
Digital Audio Outputs	1
Ethernet Port	Yes
USB Port	Yes
Bluetooth	No
Wi-Fi	No
Response Bandwidth	10 - 100000 Hz
Digital Audio Inputs	2 Optical, 2 Coaxial