Denon AVR 3802 User Manual

26
Setting the multi vol. level
Set the multi pre-out output level adjustment.
1
BAND MODE
TUNING
TUNING
At the “System Setup Menu” screen, select “Multi
Vol. Level” and press the ENTER button.
2
3
BAND MODE
TUNING
TUNING
ENTER
SHIFT
Enter the setting.
The “System Setup Menu” reappears.
Select the desired settimg.
0 dB, -40 dB:
The output level is fixed at the set level and the volume can no longer be
adjusted.
Variable:
The level can be adjusted freely using the buttons on the remote control
unit.
Setting the on-screen display (OSD)
• Use this to turn the on-screen display (messages other than the menu screens) on or off.
1
BAND MODE
TUNING
TUNING
At the System Setup Menu select “On Screen Display”.
2
3
ENTER
SHIFT
BAND MODE
TUNING
TUNING
Switch to the On Screen Display screen.
Select “ON” or “OFF”.
ENTER
SHIFT

Denon AVR 3802 Specifications

General

Number of Channels	7.1
Tuner	AM/FM
Remote Control	Yes
Signal To Noise Ratio	100 dB
Input Sensitivity	200 mV
Input Impedance	47 kOhms
Total Harmonic Distortion	0.05%
Dolby Processing	Dolby Digital, Dolby Pro Logic II
Video Inputs	3 S-Video
Preamp Outputs	7.1
Frequency Response	10 Hz - 100 kHz