Denon AVR 3802 User Manual

47
[3] Remote control unit operations during multi-source playback (selecting the input source)
This operation is possible when Multi mode is selected.
This operation is not possible in the REC OUT mode.
1
Select “MULTI” using the
RECEIVER button.
(Remote control unit)
2
Press the input source
button.
The multi source switches
directly.
[4] Remote control unit operation during multi-source playback (adjusting the volume level)
1
Select “MULTI” using the
RECEIVER button.
2
Use the VOLUME buttons to adjust the
volume level.
NOTE:
MULTI VOLUME functions when
“Variable” is selected for SYSTEM
SETUP MENU “Multi Vol. Level”.
(See page 26.)
VOLUME
+
-
1
2
3
456
789
TV
CD
CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP DVD
TUNER
VDP
VCR-1 VCR-2/V.AUX
DVD
TV/DBS
CDR/TAPE
PHONO
CD
DISPLAY
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
1
2
TV
CD
CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP DVD
TUNER
PHONO
CD
DISPLAY
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
1
2
(Remote control unit)
(Remote control unit)
[2] Outputting a program source to an amplifier, etc., in a different room (MULTI mode)
1
Press the REC/MULTI button.
The display switches as follows each
time the button is pressed.
REC /
MULTI
2
With “M-SOURCE SOURCE” displayed,
turn the FUNCTION knob and select the
source you wish to output.
• The “MULTI” indicator and the
indicator of the selected source light.
FUNCTION
3
Start playing the source to be output.
• For operating instructions, refer to the manuals of the
respective components.
4
To cancel, turn the function knob and select “SOURCE”.
• When “SOURCE” is selected, the “MULTI” indicator turns
off.
FUNCTION
B
22,4
1
VCR -1 -2 / TAPE -1 -2
PHONO CD TUNER DVD / VDP TV / DBS
2
MULTI
M-SOURCE SOURCE
Display
NOTES:
• The signals of the source selected in the MULTI mode are also
output from the VCR-1, VCR-2/V.AUX and CDR/TAPE recording
output terminals.
• Digital signals are not output from the multi source audio output
jacks.
(Main unit)
(Main unit)
(Main unit)
(Remote control unit)
RECEIVER
RECEIVER
3
CD
Example: CD

Denon AVR 3802 Specifications

General

Number of Channels	7.1
Tuner	AM/FM
Remote Control	Yes
Signal To Noise Ratio	100 dB
Input Sensitivity	200 mV
Input Impedance	47 kOhms
Total Harmonic Distortion	0.05%
Dolby Processing	Dolby Digital, Dolby Pro Logic II
Video Inputs	3 S-Video
Preamp Outputs	7.1
Frequency Response	10 Hz - 100 kHz