Select the mode.
Select "Auto" or "Manual".
• AUTO:
Adjust the level while Eistenlng to the test tones produced
autematicaEly from the different speakers.
• Manual:
Select the speaker from which you want to produce the test tone to
adjust the level.
Channel Level
i
,_Test Tone _4:_
Surf. Sp. []_B A+B
Test Tone Start [_<
Level Clear [_4
Example:When the "Auto" mode is selected
Select "Surf Sp", then select the surround speaker(s) from which you want to produce the test
tone (A, B or A+B)
• Surr Sp: A
Adiusts the balance of the playback level between the channels when using surround speaker A
• Surr Sp: B
Adiusts the balance of the playback level between the channels when using surround speaker B
• Surr Sp:A+B
Adjusts the balance of the playback level between the channels when using surround speakers
A and B at the same time
"_ The "Surf Sp" can only be selected when both surround speakers A and B have been selected
at the System Setup Menu (when both A and B have been set to "Large" or "Small")
7
Select "Test Tone Start".
Channel Level
Test Tone _4:_
Surr. Sp. []_B A+B
_Test Tone Start [_]<
Level Clear [_4
8
a. )f the "Auto" mode is selected:
Test tones are automatically emitted from the different speakers.
The test tones are emitted from the different speakers in the
following order, at 4-second intervals the first time and second time
around, 2-second intervals the third time around and on:
._ I spkr
2spkrs
._ When the surround back speaker setting is set to "lspkr" for
"Speaker Configuration", this is set to "SB".
b _ _ Use the CURSOR left and right buttons to adjust all the speakers to the
_:t _ IrA same volume.
_,_/ _'_ The volume can be adjusted between -12 dB and +12 dB in units of
b. When the "Manual" mode is selected
Use the CURSOR up and down to select
the speaker for which you want to output
test tones, then use the CURSOR left and
right to adjust so that the volume of the
test tones from the various speakers is
the same.
Test Tone [_
_FL <-1 1. 5da_
c o. ode
FR 0, 0dB
SR O. Ode
SBR O. OdB
SBL O. OdB
Flashing SL O, OdB
SW 0, 0dB
Example: When the volume is set to-115 dB
while the test tone is being
produced from the Front Lch
speaker
• Test Tone
_FL <-1 1. 5dSP
i_ C O. OdB
FR O. OdB
_ I_ I SR O. OdB
SBR O. OdB
SBL O, OdB
Flashing _ SL O, Od8
SW O. OdB
Example: When the volume is set to -t 15 dB
while the Front Lch speaker _s
selected
23
To Next Page
Loading...
