Denon AVR-3803

Select "ON" if you want to use the auto surround mode, "OFF" if you
do not want to use it.
Auto Surround Mode
_ : _[_
Enter the setting.
The System Setup Menu reappears.
• Use this to turn the on-screen display {messages other than the menu screens) on or off.
• Sets the on-screen display's display mode.
Mode 1: Prevents flickering of the on-screen display when there is no video signal.
Mode 2: Flickering is not prevented.
Use this mode if the on-screen display does not appear in the mode 1, as may happen according to the TV being used.
1
At the System Setup Menu select "On Screen Display"
and press the ENTER button.
System Setup Menu
Audio Delay
Ext. In SubwooferLevel
Auto Surround Mode
70n Screen Display
Trigger Out Setup
Auto Tuner Presets
Setup Lock
2
Select "ON" or "OFF".
On Screen Display
Select the On Screen Display mode and select
"Model" or "Mode2".
On Screen Display
m_ :_[_
ut_]_H4:_Mode2
4
Enter the setting.
The System Setup Menu reappears.
3O