Use the CURSOR button to select "Yes".
"Search" flashes on the screen and searching begins.
"Completed" appears once searching is completed.
The display automatically switches to screen.
This completes system setup. Once these settings are made, there is no need to change them unless different AV components are connected
or the speakers are repositioned.
The system setup settings can be locked so that they cannot be changed easily.
1
At the System Setup Menu select "Setup Lock".
System Setup Menu
Audio Delay
Ext. In Subw00ferLevel
Auto Surround Mode
On Screen Display
Trigger Out Setup
Auto Tuner Presets
7Setup Lock
Switch to the Setup Lock screen.
Select "ON", to lock the system setup settings.
Press jog stick "ENTER" to finalize the setting and exit the system setup mode.
When the setup lock function is activated, the settings listed below cannot be changed, and "Setup Locked" is
displayed when related buttons are operated.
• System setup settings
• Surround parameter settings
• Tone control settings
• Channel level settings (including test tones)
To unlock, press the System Setup button again and display the Setup Lock screen, then select "OFF" and press
"ENTER".
-_ System setup is complete. Once these settings are made, there is no need to change them unless different AV components are
connected or the speakers are repositioned.
32
To Next Page
Loading...
