This button can be pressed at any time during the system setup process to complete the process.
_ At the System Setup Menu, press the SYSTEM SETUP button.
s_ue_ ,_ The changed settings are entered and the on-screen display turns off.
• On-screen display signals
Signalsinputto the AVR-3803/1083 On-screen display signal output
VIDEO signal input iack S-video signal input iack Video signal output to VIDEO Video signal output to S- Video signal output to Color Difference
(yellow) MONITOR OUT iack {yellow) Video MONITOROUT jack (Component)Video MONITOR OUT jack
I x x O O O
2 0 x 0 0 0
3 × 0 0 0 0
4 0 0 x 0 0
(O: Signal x: No signal) {O: On-screen signals output x: On-screen signals not output)
NOTE:
• When a component video signal is input and when the "Video Input Mode" is set to the component fixed mode at system setup, the on-
screen display is only displayed when the System Setup, Surround Parameters and On Screen buttons are operated.
33
To Next Page
Loading...
