Denon AVR-3803

• TO operate the surround mode and surround parameters from the remote control unit.
Select the surround mode for the input channel.
DSP
SIMUIJ_TION
(Remote ¢o_tlol u_Jtl
The surround mode switches in the following order each time the DSP
SIMULATION button is pressed:
SURROUND
F_AME1_
{Remote cor_tlol unJtl
Display the surround parameter screen on the monitor.
The screen for the selected surround mode appears.
ROCK ARENA
_ EFFECT4 10_
TONE
CH OUT
[_ Yes4
Set the parameters.
{Remote control uhit}
SUP,ROUNV TO end the setting mode, press the surround parameter button again.
R_ME_
{Remote corltrol unitl
NOTES:
• The surround speaker setting can also be changed with the SPEAKER button on the remote control unit.
• When "Default" is selected and the _1 courser button is pressed, "CINEMA EQ." and "D.COMR" are automatically turned off, "ROOM
SIZE" is set to "medium", "EFFECT LEVEL" to "10", "DELAY TIME" to "30ms" and "LFE" to "0dB'.
• The "ROOM SIZE" expresses the expansion effect for the different surround modes in terms of the size of the sound field, not the actual
size of the listening room.
63