Denon AVR-4306 - Page 14

D&M Holdings Inc
V06
14/21
FAQ6.0_Ethernet_ASD_AVC_AVR_CHR_DNP_S-serie_ENG..doc
15 On the WMC, no permission
indication also appears.
The IP address of the AV
amplifier differs from PC.
As general knowledge of
LAN, a different subnet is
not connectable.
[Connectable example:]
<PC side>
IP: 192.168.0.2
Subnet: 255.255.255.0
<AV amplifier>
IP: 192.168.0.1
Subnet: 255.255.255.0
[Example that is not
connectable:]
<PC side>
IP: 192.168.100.2
Subnet: 255.255.255.0
<AV amplifier>
IP: 192.168.0.1
Subnet: 255.255.255.0
Please confirm the IP address of
the AV amplifier at the system
setup menu.
IP address of the PC can be
confirmed on the PC by inputting
"ipconfig", after executing the
"accessories" and the "command
prompt" of Windows XP.
If the IP address of the PC differs
from the address of the AV
Amplifier, please use the same
address. Usually, as for the PC
and the AV amplifier, the IP
address has been set as
automatic acquisition.
The IP address is automatically
assigned to the PC and the AV
amplifier from the Router when
the Power was turned on.
When it has manually set to a
fixed IP address, you have to use
either only one of address of the
PC and AV Amplifier.
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
16 What is SSManger ? It is a tool to back up a
state of the setting of the
product.
Save it on the HDD of the
PC from the Web page of
the main unit and use it
after unpack
It is possible to put back
setting which was changed
by false operation later
when back up the state of
the setting of the product.
This is only for AV
Receiver and Amplifier
product.
S series and ASD model
has not
“WEB server
function”
n/a n/a n/a n/a n/a n/a