Denon AVR-4810CI - Page 17

17
AVR-4810CI/AVR-4810
SPECIAL MODE
Special mode setting button
※ Press the ON/OFF button to turn on while pressing both buttons A and B at the same time.
Mode Button A Button B contents
Version display
(µcom/DSP Error Display)
STATUS RETURN
Serial No. and firmware versions such as Main, Sub, DSP are
displayed in the FL manager. Errors are displayed when they
occur. (Refer to 16 page.)
Displaying the protection history mode
STATUS MENU
Displaying the protection history
(Refer to 18 page.)
Initialization mode
(Remove settings for Installer Setup.)
STANDARD
DSP
SIMULATION
Backup data initialization is carried out.
(Remove settings for Installer Setup.)
Initialization mode
(Includes settings for Installer Setup)
CURSOR UP
CURSOR
DOWN
Backup data initialization is carried out.
(Includes settings for Installer Setup)
Mode for switching tuner frequency step
STANDARD
DIRECT/
STEREO
---E2 model only---
Change tuner frequency step to FM:200kHz/AM:10kHzSTEP.
Mode for preventing remote control
acceptance
STATUS ENTER
Operations using remote control are rejected.
(Mode cancellation: Turn off power and execute the same button
operations as when performing setup.)
Panel lock mode
DSP
SIMULATION
ZONE2
Operations using main unit panel buttons or master volume are
rejected.
Panel lock mode
(Remove Master volume)
DIRECT/
STEREO
ZONE2
Operations using main unit panel buttons are rejected.
Cancellation of panel lock mode
PURE
DIRECT
ZONE2
Panel lock mode is cancelled.
Installer Setup mode
MENU
CURSOR
LEFT
Access Remote Maintenance mode via the internet.Installer Setup
is displayed on GUI/Option Menu.
※ Refer to AVR_RemoteMaintenance_.pdf of SDI.
ON/OFF
RETURN
ZONE2
DSP
SIMULATION
STANDARD STATUSENTER
PURE
DIRECT
DIRECT/
STEREO
MENU
CURSOR
s