Denon AVR-4810CI - Page 26

26
AVR-4810CI/AVR-4810
81
Failure to delete data before rewrit-
ing serial flash.
Turn the power off then back on.
Updating starts automatically.
82
Failure to receive firmware for
serial flash rewriting sent by
DM870 (when timed out).
Turn the power off then back on.
Updating starts automatically.
83
Failure to receive firmware for
serial flash rewriting sent by
DM870 (when an error).
Turn the power off then back on.
Updating starts automatically.
84
Failure to receive firmware for
serial flash rewriting sent by
DM870 (when a Check Sum error).
Turn the power off then back on.
Updating starts automatically.
85
Failure to receive firmware for
serial flash rewriting sent by
DM870 (when invalid data
received).
Turn the power off then back on.
Updating starts automatically.
86
Failure to rewrite when writing data
in serial flash.
Turn the power off then back on.
Updating starts automatically.
A0
Failure to acquire (Application
Mode) IP address before rewriting
DM870 (AutoIP).
Check the network connection.
Carry out the update in an environment
that has little network load.
A1
Failure to acquire (Application
Mode) IP address before rewriting
DM870 (when timed out).
Check the network connection.
Carry out the update in an environment
that has little network load.
A2
Notification of invalid login via
DPMS access when rewriting
DM870 related firmware (Applica-
tion Mode).
Check the network connection.
Carry out the update in an environment
that has little network load.
A3
Notification of line congestion via
DPMS access when rewriting
DM870 related firmware (Applica-
tion Mode).
Check the network connection.
Carry out the update in an environment
that has little network load.
A4
Notification of connection failure
via DPMS access when rewriting
DM870 related firmware (Applica-
tion Mode).
Check the network connection.
Carry out the update in an environment
that has little network load.
A5
Connection through DPMS access
timed out when rewriting DM870
related firmware (Application
Mode).
Check the network connection.
Carry out the update in an environment
that has little network load.
A6
Firmware data error message
received after DPMS login when
rewriting DM870 related firmware
(Application Mode).
Turn the power off then back on.
Updating starts automatically.
Carry out the update in an environment
that has little network load.
A7
When rewriting DM870 related
firmware (Application Mode),
request was made for firmware
data after DPMS login but it timed
out.
Turn the power off then back on.
Updating starts automatically.
Carry out the update in an environment
that has little network load.
A8
Failure to acquire (Boot Loader
Mode) IP address before rewriting
DM870 (AutoIP).
Check the network connection.
Carry out the update in an environment
that has little network load.
Error
code
Det
ails of Err
or code Display Coping strategies
***
mi n
U
pda t i ng f a i l 81
G
UI Fl ash
***
mi n
U
pda t i ng f a i l 82
G
UI Fl ash
***
mi n
U
pda t i ng f a i l 83
G
UI Fl ash
***
mi n
U
pda t i ng f a i l 84
G
UI Fl ash
***
mi n
U
pda t i ng f a i l 85
G
UI Fl ash
***
mi n
U
pda t i ng f a i l 86
G
UI Fl ash
E
ther IMG
***
mi n
C
onnec t i onFa i l A0
E
ther IMG
***
mi n
C
onnec t i onFa i l A1
E
ther IMG
***
mi n
L
og i n f a i l ed A2
E
ther IMG
***
mi n
S
erver is busyA3
E
ther IMG
***
mi n
C
onnec t i onFa i l A4
E
ther IMG
***
mi n
C
onnec t i onFa i l A5
E
ther IMG
***
mi n
U
pda t i ng f a i l A6
E
ther IMG
***
mi n
U
pda t i ng f a i l A7
E
ther IMG
***
mi n
C
onnec t i onFa i l A8