Denon AVR-485S User Manual

41
NOTE:
• When making parameter settings, the display will return to the regular condition several seconds after the last button was pressed and
the setting will be completed.
7
Set the various surround parameters.
• CINEMA EQ setting
ON OFF
or or
CINEMA EQ OFF
• PANORAMA setting
ON OFF
or or
PANORAMA OFF
• DIMENSION setting
0 3 6
or or
DIMENSION 3
• TONE DEFEAT setting
ON OFF
or or
TONE DEF. ON
• DEFAULT setting
YES Y/N NO
or or
DEFAULT Y/N
Select “Yes” to reset to the factory defaults.
8
Press the ENTER button to finish surround parameter mode.
(Remote control unit)
• CENTER WIDTH setting
0
CENTER WIDTH 3
4 7
or or
• SURROUND BACK SPEAKER setting
ON OFF
or or
SB : ON
MODE CINEMA
CINEMA EQ
TONE DEFEAT
DEFAULT
MODE MUSIC
TONE DEFEAT
SURROUND BACK
PANORAMA
DEFAULT
DIMENSION
MODE Dolby PL
CINEMA EQ
TONE DEFEAT
DEFAULT
SURROUND BACK
SURROUND BACK
CENTER WIDTH
MODE GAME
TONE DEFEAT
SURROUND BACK
DEFAULT
6
Set the surround parameters according to the mode.
(Main unit)
(Remote control unit)
• The mode switches as shown below each time the button is pressed.
If you do want the bass and trable to be adjusted, turn off the tone defeat mode.
ENGLISH
• D. COMP. setting
OFF
LOW MID HIGH
oror
D.COMP. OFF
• LFE setting
-10dB
-5dB 0dB
oror
LFE 0dB
NOTE:
This parameter is displayed during DOLBY DIGITAL playback.
NOTE:
This parameter is displayed during DOLBY DIGITAL playback.

Denon AVR-485S Specifications

General

Brand	Denon
Model	AVR-485S
Category	Stereo Receiver
Language	English