54
Preset stations
1
Press the MEMORY button.
2
Press the SHIFT button and select the desired memory block
(A to G).
(Main unit) (Remote control unit)
3
Press the PRESET • (+) or ª (–) button to select the desired
preset channel (1 to 8).
(Main unit) (Remote control unit)
4
Press the MEMORY button again to
store the station in the preset
memory.
To preset other channels, repeat steps 1 to 4.
A total of 56 broadcast stations can be preset – 8 stations
(channels 1 to 8) in each of blocks A to G.
1, 4
3
2
Recalling preset stations
Preparations:
Use the “Auto tuning” or “Manual tuning” operation to tune in the
station to be preset in the memory.
(Remote control unit)
(Remote control unit)
1
Watching the display, press the SHIFT button to select the
preset memory block.
(Main unit) (Remote control unit)
2
Watching the display, press the PRESET • (+) or ª (–) button
to select the desired preset channel.
(Main unit) (Remote control unit)
2
1
NOTE: Please make sure the “AUDIO” position of the slide
switch on the remote control unit.
NOTE: Please make sure the “AUDIO” position of the slide
switch on the remote control unit.
ENGLISH
To Next Page
Loading...
