Denon AVR-485S - Dolby Digital & DTS Surround (digital input)

44
Dolby Digital mode (only with digital input) and DTS Surround (only with digital input)
1
Select the input source.
q Select an input source set to digital (COAXIAL/OPTICAL)
(see page 26).
(Main unit) (Remote control unit)
w Set the input mode to “AUTO” or DTS.
2
Select the STANDARD (Dolby/DTS Surround) mode.
(Remote control unit)
4
Play a program source with the , mark.
• The Dolby Digital indicator lights when
playing Dolby Digital sources.
DIGITAL
Light
2 5 63
1 1 4
5
3
66
1
1
7
2
Playback with a digital input
• The DTS indicator lights when playing
DTS sources.
Light
Example: DVD
(Main unit) (Remote control unit)
(Main unit)
Operate the SURROUND BACK button to switch Surround
Back CH ON/OFF.
(Remote control unit)(Main unit)
• Lights when the Surround Back CH is
on.
Light
3
ENGLISH