Denon AVR-485S User Manual

48
DSP surround simulation
1
Select the surround mode for the input channel.
(Remote control unit)
The surround mode switches in the following order each time
the DSP SIMULATION button is pressed:
2
33
4
1
2
To enter the surround parameter setting mode, press the
SURROUND PARAMETER button.
• The surround parameter switches in the following order
each time the SURROUND PARAMETER button is pressed
for the different surround modes.
MONO MOVIE ROCK ARENA
JAZZ CLUBVIDEO GAME
MATRIX
•To operate the surround mode and surround parameters from the
remote control unit.
(Remote control unit)
ROOM SIZE
EFFECT LEVEL
TONE DEFEAT
SURROUND BACK
DEFAULT
DELAY
TONE DEFEAT
SURROUND BACK
DEFAULT
TONE DEFEAT
DEFAULT
• MONO MOVIE
• ROCK ARENA
• JAZZ CLUB
• VIDEO GAME
• MATRIX • VIRTUAL
If you do want the bass and trable to be adjusted, turn off the tone defeat mode.
3
Set the various surround parameters.
• ROOM SIZE setting
SMALL MED-S
MED MED-L LARGE
oror
ROOM SIZE MED
• EFFECT LEVEL setting
1
10 15
oror
EFFECT LEVEL 10
• DELAY TIME setting
0ms
30ms 110ms
oror
DELAY 30ms
• D. COMP. setting
OFF
LOW MID HIGH
oror
D.COMP. OFF
• LFE setting
-10dB
-5dB 0dB
oror
LFE 0dB
NOTE:
This parameter is displayed during DOLBY DIGITAL playback.
NOTE:
This parameter is displayed during DOLBY DIGITAL and DTS
playback.
ENGLISH

Denon AVR-485S Specifications

General

Brand	Denon
Model	AVR-485S
Category	Stereo Receiver
Language	English