47
Home THX Cinema mode
[1] Playing sources recorded in Dolby Pro Logic in the Home THX Cinema surround mode
1
Select the Home THX Cinema mode.
(Main unit) (Remote control unit)
2
Play a program source with the mark.
• For operating instructions, refer to the manuals of the
respective components.
1
Select the program source
Selecting the Dolby Digital input
Perform step 1 under “Dolby Digital mode and DTS
Surround” (page 45).
[2] Playing sources recorded in Dolby Digital or DTS in the Home THX Cinema surround mode
Selecting a digital input source
Perform step 1 under “Dolby Digital mode and DTS
Surround” (page 45).
2
Select the Home THX Cinema mode.
(Main unit) (Remote control unit)
3
Play a program source with the or
mark.
For operating instructions, refer to the manuals of the
respective components.
When the source is played, the input channel indicators
indicating the signals included in the source light as shown
on the diagram below. (The number of channels that lights
depends on the input source.)
L: Front left channel
C: Center channel
R: Front right channel
SL: Surround left channel
S: Mono surround channel
SR: Surround right channel
• Also, the following indicator lights if the
software contains Low Frequency Effect
sounds:
The DTS indicator lights when playing DTS
sources.
Lit
To Next Page
Loading...
Need help?
General
