Denon AVR-5805 - Page 16

29.Mar.06
16/25
COMMAND PARAMETER
function example
Z2PS TONE DEFEAT ON
PARAMETER setting
Z2PSTONE DEFEAT ON<CR>
TONE DEFEAT OFF
TONE DEFEAT ON/OFF
Z2PSTONE DEFEAT OFF<CR>
SB:MTRX ON
SURROUND BACK SP MODE set
Z2PSSB:MTRX ON<CR>
SB:NON MTRX
---MTRX ON = SURR.EX ON = DSCRT ON
Z2PSSB:NON MTRX<CR>
SB:PL2xCINEMA
(@THX) (@ES DSCRT)
Z2PSSB:PL2X CINEMA<CR>
SB:PL2xMUSIC Z2PSSB:PL2X MUSIC<CR>
SB:OFF Z2PSSB:OFF<CR>
CINEMA EQ.ON
CINEMA EQ. ON/OFF
Z2PSCINEMA EQ.ON<CR>
CINEMA EQ.OFF Z2PSCINEMA EQ.OFF<CR>
MODE : MUSIC
CINEMA / MUSIC / GAME / PL mode change
Z2PSMODE:MUSIC<CR>
MODE : CINEMA
(This parameter can change DOLBY PL2,PL2x,NEO:6 mode.)
Z2PSMODE:CINEMA<CR>
MODE : GAME
---SB=ON：PL2x mode / SB=OFF：PL2 mode
Z2PSMODE:GAME<CR>
MODE : PRO LOGIC
--- GAME can change DOLBY PL2 & PL2x mode
Z2PSMODE:PRO LOGIC<CR>
--- PL can change ONLY DOLBY PL2 mode
DELAY UP
AUDIO DELAY UP/DOWN , direct change to ***dB
Z2PSDELAY UP<CR>
DELAY DOWN
***:000 to 999 by ASCII , 000=0ms, 200=200ms
Z2PSDELAY DOWN<CR>
DELAY ***
---AVR5805 can be operated from 0 to 200
Z2PSDELAY 200<CR>
The BOLD COMMANDS are new.