Denon AVR-5805 - Page 18

29.Mar.06
18/25
EVENT(or RESPONSE) and PARAMETER list
EVENT PARAMETER
function example *RES.
PW ON POWER ON/STANDBY change PWON<CR>
STANDBY PWSTANDBY<CR>
MV ** MASTER VOLUME change , **:00 to 98 by ASCII MV80<CR>
98 = +18dB(MAX)
80 = 0dB
10 = -70dB
00 = -80dB
99 = ---(MIN)
CV FL ** CHANNEL VOLUME change , **:00 to 62 by ASCII CVFL 50<CR>
FR ** 62 = +12dB(MAX) CVFR 50<CR>
C ** 50 = 0dB CVC 50<CR>
SW1 **
38 = -12dB(MIN)
CVSW1 50<CR>
SW2 **
00 = OFF (define ONLY SWch)
CVSW2 50<CR>
LFE ** CVLFE 50<CR>
SLA ** CVSLA 50<CR>
SRA ** CVSRA 50<CR>
SLB ** CVSLB 50<CR>
SRB ** CVSRB 50<CR>
SBL ** (at SBch 2SP) CVSBL 50<CR>
SBR ** (at SBch 2SP) CVSBR 50<CR>
SB ** (at SBch 1SP) CVSB 50<CR>
EXLA ** CVEXLA 50<CR>
EXRA ** CVEXRA 50<CR>
EXLB ** CVEXLB 50<CR>
EXRB ** CVEXRB 50<CR>
EXLC ** CVEXLC 50<CR>
EXRC ** CVEXRC 50<CR>
*RES. : NOT returns '*' parameters as RESPONSE.
MV , CV COMMAND : "*" parameter uses two or three ASCII characters. (see page4 J) section)
The BOLD COMMANDS are new.