Denon AVR-5805 - Page 22

29.Mar.06
22/25
EVENT PARAMETER
function example *RES.
PS
USER1 Z2MSUSER1<CR>
USER2 Z2MSUSER2<CR>
USER3 Z2MSUSER3<CR>
ROOM EQ:AUDYSSEY
ROOM EQ mode direct change
PSROOM EQ:AUDYSSEY<CR>
ROOM EQ:FRONT PSROOM EQ:FRONT<CR>
ROOM EQ:FLAT PSROOM EQ:FLAT<CR>
ROOM EQ:MANUAL PSROOM EQ:MANUAL<CR>
ROOM EQ:OFF PSROOM EQ:OFF<CR>
DELAY UP
AUDIO DELAY change, ***:000 to 999 by ASCII
PSDELAY UP<CR>
DELAY DOWN
---AVR5805：200=200ms（MAX）
PSDELAY DOWN<CR>
DELAY ***
100=100ms, 000=0ms
PSDELAY 200<CR>
TF ****** (6 digits) TUNER Frequency change TF105000<CR>
--- ****.** kHz at AM band (1050.00kHz at AM)
****.** MHz at FM band
TP **(PRESET No.) TUNER PRESET change to No.** TPA1<CR>
(PRESET No.”A1”)
TM TUNER BAND , MODE change
AM ---Band set to AM TMAM<CR>
FM ---Band set to FM TMFM<CR>
AUTO ---Tuning mode set to AUTO mode TMAUTO<CR> *
MANUAL ---Tuning mode set to MANUAL mode TMMANUAL<CR> *
*RES. : NOT returns '*' parameters as RESPONSE.
The BOLD COMMANDS are new.