29.Mar.06
23/25
EVENT PARAMETER
function example *RES.
Z2CV FL **
MULTI ZONE-2 CHANNEL VOLUME change ,
Z2CVFL UP<CR>
FR **
**:00,38 to 62 by ASCII
Z2CVFL DOWN<CR>
C **
62 = +12dB(MAX)
Z2CVFL 50<CR>
SW **
50 = 0dB
Z2CVFR UP<CR>
SL **
38 = -12dB(MIN)
Z2CVFR DOWN<CR>
SR **
00 = OFF (define ONLY SWch)
Z2CVFR 50<CR>
SBL **
(at SBch 2SP)
Z2CVC UP<CR>
SBR **
(at SBch 2SP)
Z2CVC DOWN<CR>
SB **
(at SBch 1SP)
Z2CVC 50<CR>
Z2 PHONO MULTI ZONE-2 source change Z2PHONO<CR>
| ---The name of PARAMETER is |
CDR/TAPE
the same as that of the time of SI COMMAND. Z2CDR/TAPE<CR>
SOURCE MULTI ZONE-2 mode cancel Z2SOURCE<CR>
** MULTI ZONE-2 VOLUME change , **:00 to 99 by ASCII Z280<CR>
98 = +18dB(MAX)
80 = 0dB
00 = -80dB
99 = ---(MIN)
ON MULTI ZONE-2 ON/OFF change Z2ON<CR>
OFF Z2OFF<CR>
Z2MU ON
ZONE2 OUTPUT MUTE ON/OFF change
Z2MUON<CR>
OFF
Z2MUOFF<CR>
Z2SV DVD
ZONE2 VIDEO SELECT mode set , and select source
Z2SVDVD<CR>
VDP
Z2SVVDP<CR>
TV
Z2SVTV<CR>
DBS
Z2SVDBS<CR>
VCR-1
Z2SVVCR-1<CR>
VCR-2
Z2SVVCR-2<CR>
VCR-3
Z2SVVCR-3<CR>
VCR-4
Z2SVVCR-4<CR>
The PARAMETER of Z2, Z2CV EVENT : Uses two or three ASCII characters. (see page4 J) section)
The BOLD COMMANDS are new.
To Next Page
Loading...
