Denon AVR 689 - AV Receiver


Getting Started Connections Setup Playback Remote Control Multi-Zone Troubleshooting
ENGLISH
Specifications
Button
Note
Input signals
ANALOG LINEAR PCM
LINEAR PCM
(Multi ch)
DTS DOLBY DIGITAL
Surround mode
DTS ES
DSCRT
(With Flag)
DTS ES
MTRX
(With Flag)
DTS (5.1ch) DTS 96/24
DOLBY
DIGITAL EX
(With Flag)
DOLBY
DIGITAL EX
(With no Flag)
DOLBY
DIGITAL
(5.1/5/4ch)
DOLBY
DIGITAL
(4/3ch)
DOLBY
DIGITAL (2ch)
STANDARD
DTS SURROUND
DTS ES DSCRT6.1
z
1
A A A F A A A A A A A A
DTS ES MTRX6.1
z
1
A A A A F A A A A A A A
DTS SURROUND
A A A D D F D A A A A A A
DTS 96/24
A A A A A A F D A A A A A
DTS + PLgx CINEMA
z
2
A A A A A S S A A A A A
DTS + PLgx MUSIC
z
1
A A A A A S S A A A A A
DTS + NEO:6
z
1
A A A A A S S A A A A A
DTS NEO:6 CINEMA
S S A A A A A A A A A S
DTS NEO:6 MUSIC
S S A A A A A A A A A S
DOLBY Surround
DOLBY DIGITAL EX
z
1
A A A A A A A F b1 S S S A
DOLBY DIGITAL
A A A A A A A D D F D F D F A
DOLBY DIGITAL + PLgx CINEMA
z
2
A A A A A A A F b2 S S S A
DOLBY DIGITAL + PLgx MUSIC
z
1
A A A A A A A A S S S A
DOLBY PRO LOGIC gx CINEMA S S A A A A A A A A A F
DOLBY PLgx MUSIC S S A A A A A A A A A S
DOLBY PLgx GAME S S A A A A A A A A A S
DOLBY PLg CINEMA S S A A A A A A A A A D
DOLBY PLg MUSIC S S A A A A A A A A A S
DOLBY PLg GAME S S A A A A A A A A A S
DOLBY PRO LOGIC
S S A A A A A A A A A S
D : Mode selectable in initial status (Amp Assign: ZONE2 b The default setting is “ZONE2”.)
F : Mode selectable in initial status (Amp Assign: 7.1ch)
S : Selectable mode
A : Non-selectable mode
b1 : When using just one surround back speaker.
b2 : When using two surround back speakers.
NOTE:
z
1: This mode is not available when the surround back speaker setup is set to “None”.
z
2: This mode is not available when the surround back speaker setup is set to “1spkr” or “None”.
Differences in Surround Mode Names Depending on the Input Signals
Information