To Next PageTo Next Page
Need help?Do you have a question about the Denon AVR-770SD and is the answer not in the manual?
Important safety cautions regarding electric shock, fire, and product handling.
Instructions for initial setup, including moving the set and power switch operations.
Guidelines for safe handling, including input jacks, muting, and power.
Instructions for connecting CD players, tape decks, and other audio equipment.
Connecting multi-channel audio signals from external decoders or players.
Explanation of the unit's protection circuit and troubleshooting steps.
Steps to configure system settings using the remote control and main unit.
Setting speaker parameters to optimize system performance based on speaker capabilities.
Adjusting subwoofer mode and crossover frequency for optimal bass response.
Setting subwoofer mode for LFE+MAIN or LFE playback based on speaker configuration.
Adjusting speaker delay times based on measured distances for optimal surround timing.
Calibrating playback levels for each speaker using test tones.
Configuring component video input jacks for different video sources.
Ensuring all connections are correct before turning on the unit.
Playing sources via the external input jacks, bypassing surround circuitry.
Selecting playback modes for music and adjusting tone controls.
Calibrating playback levels for each speaker using test tones.
Selecting input sources and modes for Dolby Digital and DTS playback.
Setting up DTS NEO:6 modes and surround parameters for enhanced audio.
Detailed explanation of Pro Logic II modes, Panorama, Dimension, and Center Width.
Explanation of DTS NEO:6 Cinema and Music parameters, including EQ and D.COMP.
Using Dolby Virtual Speaker mode with digital inputs for surround sound.
Choosing surround modes like Direct, Stereo, Dolby, DTS, and DSP simulations.
Table detailing signal adjustability and compatibility across different surround modes.
Setting various surround parameters for Dolby Headphone modes, including D.COMP and LFE.
Searching for RDS stations broadcasting a specific program type (PTY).
Procedure to reset the unit's microprocessor to default settings.
Explanation of DTS 96/24 high-resolution audio and DTS Neo:6 modes.
Resolving issues like no display, no sound, or distorted sound.
Addressing problems with remote control operation, such as dead batteries or obstacles.
Resolving humming noise, howling noise, and single-channel sound problems.
General
