Denon AVR-884

Power Amp Assignment
Setting the power amplifier assignment
Make this setting to switch the power amplifier for the surround back channel to ZONE2.
1
Select “Surround Back” to use as the surround back channel,
“Zone2” to use as Zone 2 out.
2
Press the ENTER or (down) button to switch the On Screen Display setting.
24 AMP S.BACK
Setting the On Screen Display (OSD)
• Use this to turn the on-screen display (messages other than the menu screens) on or off.
1
Select “ON” or “OFF”.
25 OSD ON
2
Press the ENTER or (down) button to switch the Auto Preset Memory setting.
28
ENGLISH