Denon AVR-990 User Manual


Getting Started Settings Playback Remote ControlZONE2 Information Troubleshooting Specifications
ENGLISH
s Set the “Amp Assign” Mode According to the Speaker Layout
The signals output from the AVR-990’s SURR. BACK/AMP ASSIGN speaker terminals can be switched (vpage 33 “Amp Assign”).
Amp assign
mode
(vpage 33)
SURR. BACK /
AMP ASSIGN
Speaker connections
Example of speaker installation
(Number of channels played)
Normal
Surround Back
Speakers
Normal
Surround Back L
Speaker
Connect to the “L”
speaker terminal.
Set “Surround Back”
(vpage 33) to
“1spkr”.
b
b
Normal
Not connected
Set “Surround Back”
(vpage 33) to
“None”.
b
ZONE2
(Default)
ZONE2 speakers
MAIN ZONE ZONE2
(7.1)
(6.1)
(5.1)
(5.1) (2)
Amp assign
mode
(vpage 33)
SURR. BACK /
AMP ASSIGN
Speaker connections
Example of speaker installation
(Number of channels played)
Front A Bi-Amp
or
Front B Bi-Amp
Front A or B
speakers
For connections,
see “About Bi-amp
Connections” (vpage
12).
b
Front Height
Front height
Speakers
(5.1)
(7.1)
Installing/Setting the Speakers
Connections

Denon AVR-990 Specifications

General

Brand	Denon
Model	AVR-990
Category	Stereo Receiver
Language	English