Getting Started Settings Playback Remote ControlZONE2 Information Troubleshooting Specifications
ENGLISH
Connecting Devices
Control dock for iPod
Set other than when iPod is assigned to the VCR (iPod) terminal.
“Input Assign” – “iPod dock“ (vpage 46)
Set as Necessary
Control Dock for iPod
Use a DENON control dock for iPod (ASD-1R or ASD-11R, sold
separately) to connect the iPod to the AVR-990. For instructions on
the control dock for iPod settings, refer to the control dock for iPod’s
operating instructions.
With the default settings, the iPod can be used connected to the VCR
(iPod) connector.
R
L
R
L
065
7*%&0
$0.10/&/57*%&0
: 1# 13
7*%&0
065
47*%&0
065
"6%*0
"6%*0
3-
065
065
$0"9*"-
Blu-ray Disc player / DVD player
Connecting the Playback Components
Blu-ray Disc Player / DVD Player
Select the terminal to use and connect the device.
NOTE
In the case of HD audio (Dolby TrueHD, DTS-HD and Dolby Digital Plus
and DTS Express) audio playback, connect with HDMI (vpage 13,
“Connecting Devices Equipped with HDMI Terminals”).
Set this to change the input signal to which the input source is
assigned.
“Input Assign” (vpage 44)
Set as Necessary
For instructions on HDMI connections, see “Connecting Devices Equipped with HDMI Terminals” on page 13.
Connections
To Next Page
Loading...
Need help?
General
